IMPORTANT CONSIDERATIONS
ENERGY SAVING FREQUENT QUESTIONS GO BACK

When loading these containers it is always important to consider cargo height; make sure air can flow between the top of the container and the cargo itself; check that the container has a (red) mark indicating the maximum storage height.

Do not cover the fins (located on the floor of the container) with goods, since air circulates in a repeated process as follows: air comes down from the Evaporator, goes through the flaps on the floor and goes back above the cargo to the engines.

Avoid opening doors continuously while heat is being removed from products (reducing temperature). If this is not possible, door opening must be reduced to a minimum.

Try to adjust the thawing time according to product conditions and the atmosphere in the place; e.g., exceedingly humid products will result in greater condensation and ice formation, which may block the passage of cold air through the evaporator. We should then reduce the thawing time to allow for more fluid removal from the system, ensuring free passage of cold air with no blockades.

The condenser (a sort of radiator) located in the container engine is responsible for removing heat from the cooling system. It should be washed at least once a week, using a low pressure hose, rinsing until the water comes out clean.

The excess of high temperature cargo will delay the time required to reduce the internal temperature value.

STORING WAYS
1º - Start loading the container from the back to the front, leaving no free spaces;

2º - Always consider the height of the ceiling (do not go beyond the red mark);

3º - Check that no cargo is left leaning against the door; at least 30 cm should be left free to facilitate cold air circulation.

ADVANTAGES

The use of reefers increases your cold storage space instantaneously and economically in your own plant.
It solves problems caused by peaks in demand or unforeseen business growth.
It prevents your product from being contaminated by others.
It allows you to access strategic areas for the distribution of your product.
The easy transportation of containers makes it possible to position them quickly anywhere in the territory and to relocate them subsequently.

MORE INFORMATION: ENERGY SAVING GO BACK